enquiry@sansel.net & info@sansel.net +91 7299972086 Maduravoyal, Chennai – 600 095. Mon-Sat: 9.30 AM - 6.00 PM

ORP Controller / Transmitter

Products

ORP Controller / Transmitter ORT 601-1 Manufacturers

ORP Controller / Transmitter

Model No: ORT 601-1

We are the best ORP Controller / Transmitter ORT 601-1 Manufacturers. The ORT 601-1 series of ORP Controller and Transmitter provides a reliable method of Monitoring, Controlling & Transmitting 4-20mA/ RS 485 MODBUS RTU communication for interfacing to PLC, Data logger, HMI, etc.,. This product is suitable to measure ORP in water treatment, Electrolytic water cleaning, Chemical industries, Food process, Waste water treatment, Textile industries & Neutralization process, etc.,.

This ORP Controller & Transmitter can measured using Industrial platinum ORP sensor. This ORP Controller & Transmitter has many user friendly and safety features which as follows.

Features

  • Economical, easy to calibrate and setup
  • Wide range from -1999 to 1999 ORP
  • High Accuracy
  • Optional isolated RS 485 communication with MODBUS RTU protocol
  • Optional galvanically isolated 4-20mA output
  • Very high output impedance >10¹² Ohms
  • User selectable single or 2 point calibration
  • 2 relay outputs with configurable individual H/L setting with 6 relay status
  • Optional audible inbuilt buzzer output with front key reset
  • Universal supply voltage 90 to 270V AC/DC

Technical Specifications

  • Model : ORT 601-1
  • Display : 4 + 4 Digit 0.5" & 0.39" 7 Seg RED LED Display
  • Range : -1999 to 1999 ORP
  • Accuracy : ± 1 ORP ± 1 digit
  • Resolution : 1 ORP
  • Electrode Input : Platinum Electrode with BNC Attachment
  • Set Point-1&2 : Two Set Point with 6 relay status selectable
  • Relay Output : Relay-1 for Setpoint-1, Relay - 2 for Setpoint - 2 with 5A Rating
  • Relay Hysteresis : 0 to 500 ORP (user adjustable) (only for High & Low control modes)
  • Relay Cyclic delay : 0 to 100 seconds (user adjustable) (only for High & Low control modes)
  • Input Impedance : >10¹² Ohms
  • Alarm Output (optional) : Inbuilt audible buzzer with front key reset
  • Optional Re. Tx. output : Galvanically Isolated 4-20 mA
  • Optional Comm. output : Isolated RS 485
  • Comm. Protocol : MODBUS RTU
  • Operating Environment : -10 to 50ºC / 10 to 95 % RH Non Condensing
  • Power Supply : 90 to 270V AC / DC 50Hz
  • Dimension : 96 x 96 x 85 mm
  • Cutout Dimension : 92 x 92 mm
  • Weight : 500 grams (Approx.)
review